Maintenance - Klarstein 10028453 Handbuch

• How to disassemble the dust-proof bracket and honeycomb filter
• To turn off the unit just press the button OFF.
• To completely shut the unit off, turn all the controls to OFF, and remove plug from the socket-outlet.
• Always remove the plug from the socket-outlet and allow the fan blower to stop acting before clean it.
• Clean the external surfaces of the unit with a soft damp (not dripping wet) cloth.
WARNING:
Do not immerse the unit in water.
Do not use any cleaning chemicals such as detergents and abrasives.
Do not allow the interior (especially the PCB) to get wet as this could create a hazard.
• After extended periods of use, be sure to replace the water in the tank with fresh clean water at least
weekly. Also remember to clean the filter by unscrewing the filter and removing the filter cradle. It
should be cleaned in a mild soapy solution and then left to dry before replacing the filter.
• When the unit is not in use, make sure that it is unplugged from the wall socket, water is drained
thoroughly and it is placed back into its original box for storage until later use.
• In case of malfunction or doubt, do not try to repair the fan yourself, it may result in a fire hazard or
electric shock.
1. Pull out the dust-proof bracket
2. Rotate the knobs outwards like left image

Maintenance

10