Cleaning Und Maintenance - Klarstein 10033542 Bedienungsanleitung

EN
16
MODE
SWING
COOL
LIGHT
Note: If you want to increase the cooling effect, you can add ice cubes or a frozen
ice pack to the water tank. Make sure that the water level is not higher than the
"MAX" mark. Plug the appliance into the mains socket and press the appropriate
button on the control panel to start cooling.

CLEANING UND MAINTENANCE

WARNING:
Risk of electrical shock! Before cleaning, always turn off the power
and unplug the appliance from the wall outlet to avoid electric shock
or damage.
• It is recommended to clean the unit at least once a week as the functionality of the
appliance may be impaired by dust and other dirt accumulation in the fi lter and
fi lter insert.
Cleaning the surface
• Wipe the housing with a soft, damp cloth.
• Do not use abrasive cleaning agents and do not wash the appliance with water as
this may penetrate into the appliance and damage the electronics.
• If water does get inside, allow the appliance to dry completely before reusing.
• Make sure that no water gets onto the control panel.
There are three modes, the corresponding indicator turns
on.
• Normal mode: The fan operates in the constant
speed set using the SPEED button.
• Natural mode: The unit simulates a natural breeze.
• Sleep mode: The unit simulates a gentle breeze
suitable for night-time use.
Press this button to start or stop oscillation from left to right.
The corresponding indicator turns on.
Press this button for a cool breeze when water is added to
the water tank. The corresponding indicator turns on. Press
again to turn off the cool breeze.
Press this button then you can control the light on or off.