Setting The Time-Lapse Delay - Silvercrest SCAA 5.00 A1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SCAA 5.00 A1

Setting the time-lapse delay

To set the time-lapse delay, proceed as follows:

Press the On/Off/Mode button [2] multiple times to select the SETUP menu and then
press the record button [9] to confirm.

Press the On/Off/Mode button [2] multiple times until the LAPSE menu is highlighted.
Press the record button [9] to open the LAPSE menu.

Press the On/Off/Mode button [2] to select an option. The following settings are
available: "1 SEC", "3 SEC", "5 SEC", "10 SEC", "30 SEC" and "60 SEC".

Press the record button [9] to confirm your selection.

To exit the SETUP menu, press the On/Off/Mode button [2] multiple times until the EXIT
item is highlighted and then press the record button [9] to confirm.
250 - English