Setting The Time-Lapse Options - Silvercrest SCW 5 A2 Bedienungsanleitung Und Serviceinformationen

Setting the time-lapse options

To set the time-lapse options, proceed as follows:

Press the On/Off/Mode button [2] multiple times to select the SETUP menu and then
press the record button [9] to confirm.

Press the On/Off/Mode button [2] multiple times until the LAPSE menu is highlighted.
Press the record button [9] to open the LAPSE menu.

Press the On/Off/Mode button [2] to select the desired option and then press the
record button [9] to confirm. The following options are available:

To exit the SETUP menu, press the On/Off/Mode button [2] multiple times until the EXIT
item is highlighted and then press the record button [9] to confirm.
Use this menu to select
lapse recording as a video or select
save it as a pictures series.
Use this menu to select the recording
interval. The following settings are available:
"1 SEC" (not for picture series), "3 SEC", "5
SEC", "10 SEC", "30 SEC" and "60 SEC".
Select this option to exit the LAPSE menu
without making any changes.
SilverCrest SCW 5 A2
to save the time-
to
English - 35