Sanitas SEM 44 Gebrauchsanweisung Seite 84

Table 4
Recommended separation distances between portable and mobile RF communications equipment and the SEM 44
The SEM 44 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the SEM 44 can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the SEM 44 as recommen-
ded below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
(W)
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be determined using the equation applica-
ble to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is afected by absorption and relection from structures, objects and people.
Hans Dinslage GmbH, Riedlinger Str. 28, 88524 Uttenweiler, Germany
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d = 1,2
0,12
0,38
1,2
3,8
12
(m)
80 MHz to 800 MHz
d = 1,2
0,12
0,38
1,2
3,8
12
84
800 MHz to 2,5 GHz
d = 2,3
0,23
0,73
2,3
7,3
23