Afk HVC-150.55R Bedienungsanleitung Seite 26

Using the Device
You can use the appliance as a floor vacuum cleaner or as a
handheld and upright vacuum cleaner (basic unit).
1. Disconnect the appliance from the mains when changing
the accessory.
2. Turn on the device.
3. Select a power level.
NOTE:
We recommend the higher power level for using the appliance
with the floor nozzle.
End of Operation
1. Turn off the device.
2. If you have already installed the wall holder, hang up the
vacuum cleaner. You can attach the crevice and brush nozzle
at the left and the right of the vacuum cleaner.
Maintenance
Emptying the Dust Collector
1. Disconnect the appliance from the power
supply unit.
2. If necessary, remove the suction tube or
the nozzle attachment from the appliance.
3. Hold the appliance with the bottom plate
of the dust collector over a dustbin.
4. Empty the contents of the dust collector. Slide the opener of
the dust collector downwards to open the bottom plate.
5. Then close the base plate again. The lock on the dust
collector must engage.
The Filter System
Your appliance features 3 filters. The common dust bag
system has been replaced by a transparent dust collector.