Charging The Battery - Afk HVC-150.55R Bedienungsanleitung

1. Measure the height for the wall holder. Hold the vacuum
cleaner against the wall with the suction pipe and the floor
nozzle installed.
2. Hold the wall holder against the wall as shown on page 21.
Mark 2 drill holes.
3. Drill the holes and insert the wall plugs into the wall.
4. Insert the screws through the holes of the wall holder.
5. Tighten the screws with a screwdriver hand-tight.

Charging the Battery

1. Turn off the device.
2. Connect the power supply unit with the connection socket
(5). If you have prepared the wall holder as a charging
station, suspend the appliance from the wall holder.
3. Connect the mains adapter to a certified wall socket.
Charge the device for approx. 5 hours before first-time use.
NOTE:
7KH /(' FKDUJH LQGLFDWLRQ VKRZV WKH FKDUJLQJ VWDWXV
of the rechargeable battery. (25 %, 50 %, 100 %)
7KH DSSOLDQFH KDV HOHFWURQLF FKDUJH FRQWURO ZKLFK
prevents overcharging.
&KDUJLQJ KDV EHHQ FRPSOHWHG ZKHQ DOO  /('V DUH OLW
7KH /('V JR RXW DIWHU D ZKLOH
,W LV QRUPDO IRU WKH GHYLFH WR KHDW XS GXULQJ FKDUJLQJ
4. The rechargeable battery must be charged when the LED
charge indication shows only 25 % of capacity.
5. Disconnect the power supply unit from the outlet once the
rechargeable battery has been charged completely.
NOTE:
Even when switched off, the rechargeable battery discharges
continuously. If the device is out of use for a longer period of
time, charge the rechargeable battery at least once every
6 to 12 weeks.