Important Information; Scope Of Delivery; Documentation; Signs And Symbols - GF COOL-FIT 4.0 Bedienungsanleitung

1.

Important information

1.1

Scope of delivery

The delivery of Foam Removal Tool comprises:
Tool d250 – d450, ncluding components and caser
•
Instruction manual COOL-FIT 4.0 foam removal tool d250 – d450
•
1.2

Documentation

The following documents are part of the product and must be considered:
EN
GF Planning Fundamentals Industry
•
The document can be obtained via your local GF Piping Systems representative or un-
der www.gfps.com
1.3

Signs and symbols

Symbol
>
2.

Safety

The assembly instructions are part of the GF product and must be read carefully before
assembly. The assembly instructions must be available at all times.
2.1

Intended use

The foam removal and peeling tool is appointed to dismantle and peel COOL-FIT 4.0
pipes.
2.2

Target group and qualification

The Foam Removal Tool may only be used by professionals who are trained regularly in
work safety and environmental protection on pressurized piping systems, and who are
trained using the COOL-FIT 4.0 foam removal and peeling tool.
2.3

Safety information

Risk of injury
Improper usage of the tool may cause injury.
Operate the COOL-FIT 4.0 for the inented use according the instructions
>
Bystanders must keep a safety distance of 1m due to rotating parts
>
26
Meaning
Action required
Perform visual check (e.g. of pipes)