KLARSTEIN CLEANMATE 10033188 Bedienungsanleitung Seite 74

EN
74
Problem
The oven is not heating.
Water comes out of
the glass door during
operation.
The oven has been
switched off, but you
can still hear that it is in
operation.
Oven door is locked and
cannot be opened.
Possible cause
Has a temperature been
selected?
If this model has a timer,
you may not have set up
the time
No power.
The heating element is
damaged.
The door seal is
permeable.
The hinge is not strong
enough
The oven is in operation
for a long time, so it must
be cooled for a long time.
The cooling fan continues
to run after switching off.
The door lock is faulty.
The temperature sensor is
faulty.
Possible solution
Set the required
temperature.
Set up the timer.
Check the power supply.
The heating element must
be replaced with a new
one. Contact custumer
service.
The door seal must be
replaced with a new one.
Contact custumer service.
The hinge must be
replaced by a new one.
Contact custumer service.
Place your hand against
the outlet opening and feel
if hot air comes out, if so,
that is normal.
If the air temperature from
the outlet opening is room
temperature, this may
indicate a defect. Contact
custumer service.
Please contact the
customer service. Do
not attempt to repair the
appliance yourself. There
are no customer service
items inside the appliance.