Troubleshooting; Normal Operation - KLARSTEIN CLEANMATE 10033188 Bedienungsanleitung

TROUBLESHOOTING

Note: The oven may have some abnormal breakdown during working. You can
check the fault list before contacting costumer service. Contact customer service if you
cannot solve the problem and do not attempt to repair the unit yourself.

Normal operation:

• When first using the oven, it may have some situation of peculiar smell and smoking
for some hours. Start the heating function by turning the temperature switch to heat
the oven for 1 hour without contents. When you use the oven for the first time, then
close the heating function, wait for some time until the oven is cold, open the door
and clean the oven.
• Cracking sounds can occur during the operation of the oven because of well of
metal.
• If the heating foods have some moisture, the heating emission hole may blow steam
during the working operation.
• The fan switches on 15 minutes after the oven begins to work. Even if the oven is
closed, the fan will continue to operate for 35 minutes.
• Please preheat the oven before baking.
• For long cooking you can switch off the oven before the end of baking and use the
residual heat for cooking.
Problem
The oven isn't working.
The lamp isn't coming on.
The oven suddenly stops
working during operation.
Possible cause
The power supply is
interrupted.
There is a malfunction of
the breakers.
You forgot to push the
timer function button.
The lamp is defective.
There is no electrical
current.
The power supply is
interrupted (power failure).
The thermostat is
overheated.
Possible solution
Check that the appliance
is plugged in and that the
power is on in your home.
Check if the breaker is
working on and reset it if
necessary.
Reset the timer function.
Replace the lamp (bulb).
Check that the oven is
supplied with power.
Check if the power is on in
your home.
Check if the cooling fan
still works. If it does please
contact customer service.
EN
73