ABC Design Condor 4S Bedienungsanleitung Seite 9

1. Opening the pushchair
Pull the handle on the stroller (1) upwards until the frame clicks into place (2).
CAUTION: Ensure that all the catches are engaged before use.
2. Fitting the wheels
a.
Press the button (1) and insert the rear wheel in the slot (2) until it engages.
b.
To remove the wheels, press the button (1) to release the wheels.
The wheels can then be removed from the axle.
c.
To mount the front wheels, push the wheels into the fittings until they click into place.
d.
To remove the front wheels, press the buttons on the wheel fittings and pull the wheels out.
3. Wheel locking and swivel settings
Push the lever down to lock the wheels.
Push the lever downwards to set the wheels in swivel position.
4. Operating the brake
Press the lever down to engage the brake.
Press the lever up to disengage the brake.
5. Attaching and converting the seat
a.
Attach the seat by placing it on the frame until it clicks into place.
b.
To remove and convert the seat, pull the levers on both seat unit adapters and lift up the seat.
6. Attaching the hood
Fit the hood on the seat frame with the two plastic brackets.
7. Fitting and removing the guard rail
a.
Fit the guard rail by inserting it in the plastic mounts on both sides.
b.
To remove the guard rail from the pushchair, press in the buttons on both sides and pull the guard rail
off away from the pushchair
EN - 06