List Of Pictograms Used; Introduction; Intended Use; Parts Description - Parkside Performance PWSAP 20-Li A1 Bedienungs- Und Sicherheitshinweise

List of pictograms used:

Read the instruction manual.
Use in dry indoor rooms only.
Switch the appliance off and remove
the battery pack before replacing
attachments, cleaning and when not
in use.
Protection class II (Double insulation)
Protect the battery pack against heat
and continuous intense sunlight.
Cordless Angle Grinder 20 V
PWSAP 20-Li A1

Introduction

Q
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product.
They contain important information concerning
safety, use and disposal. Before using the product,
please familiarise yourself with all of the safety
information and instructions for use. Only use
the product as described and for the specified
applications. If you pass the product on to anyone
else, please ensure that you also pass on all the
documentation with it.

Intended use

Q
This cordless angle grinder 20 V (hereinafter
"product" or "power tool") is designed for
grinding and wire brushing.
The product is not intended for any other types of
applications (e.g. grinding with unsuitable grinding
tools, grinding with a coolant solution, grinding or
cutting hazardous materials such as asbestos).
The product is to be used by adults. Children under
the age of 16 may not use the tool except under
supervision.
Any other use or modification of the product are
considered improper use and can result in hazards
such as death, life-threatening injuries and damage.
The manufacturer is not liable for any damages
caused by improper use. The product is not intended
for commercial use or for any other application.
Protect the battery pack against water
and moisture.
Protect the battery pack from fire.
Alternating current
Direct current
Fuse
T3.15A
Wear eye protection!
Wear ear protection!

Parts description

Q
Figure A:
Battery level button
1
Release button
2
Battery level indication light
3
Battery pack
4
5 Chuck key
6 Auxiliary handle with chuck key storage
7 Guard
8 Locking flange
9 Backing flange
10 Spindle lock button
11 Threads for auxiliary handle
12 On / off switch
13 Charger
14 Charging status LED – Red
15 Charging status LED – Green

Scope of delivery

Q
1 Cordless angle grinder 20 V PWSAP 20-Li A1
1 Battery pack PWSAP 20-Li A1-1
1 Rapid battery charger PWSAP 20-Li A1-2
1 Auxiliary handle
1 Guard
1 Chuck key stored in auxiliary handle
1 Instruction manual
GB / IE 23