Technical Data - Klarstein 10004857 Handbuch

Dear Customer,
Congratulations on purchasing this product. Please read and follow these instructions, in order to avoid
damaging the item. We do not cover any damages that may arise from improper use of the item or the
disregard of the safety instructions.
Article no.
Power rating
Electrical power
Maximum flow rate
Noise
Filtration
Venting size
First install the spare parts on the slim hood. Put the venting connector on top and the end cap
on the bottom hole or the other way round.
Measure the distance between the two up-
per holes on the back of the hood and then
drill two holes in the wall accordingly.
Use plastic anchors and long self tapping
screws.

Technical Data

10004857
110 ~ 120V / 60Hz
220 ~ 240V / 50Hz
130W
300m³/h (single motor)
540m³/h (double motor)
<65dB
5x layered Aluminum
120mm
Installation
Hang the hood body onto the two screws
that you've driven into the wall right before.
6