Inhaltsverzeichnis
Werbung
30) TARGET LIGHT SWTICH
31) START / STOP BUTTON
32) 33RPM SPEED SELECT BUTTON
33) 45RPM SPEED SELECT BUTTON
34) TARGET LIGHT
35) HEADSHELL
36) EJECT
37) POSITION FOR PREPARING CARTRIDGE
38) COUNTERWEIGHT
39) ANTI-SKATE KNOB
40) LIFT LEVER
41) TONE ARM REST PART
42) PITCH CONTROL SLIDER (+/- 10%)
43) TAPE FAST FORWARD / EJECT
44) CASSETTE PLAYER
45) TURNTABLE FOOT
46) FM WIRE ANTENNA
47) LINE-OUT SOCKET
48) GROUND TERMINAL
49) AC POWER CORD
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
WARNING:
•
THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
•
BATTERIES (BATTERY PACK OR BATTERIES INSTALLED) SHALL NOT BE EXPOSED TO EXCESSIVE
HEAT SUCH AS SUNSHINE, FIRE OR THE LIKE.
•
THE MAINS PLUGS OR AN APPLIANCE COUPLER IS USED AS THE DISCONNECT DEVICE, AND THE
DISCONNECT DEVISE SHALL REMAIN READILY OPERABLE.
INSTALLATION
•
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
•
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.
•
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. PLUG THE UNIT INTO A SUITABLE MAINS SOCKET
2. TURN THE POWER SWTICH CLOCKWISE TO ENTER TO STANDBY MODE, STANDBY INDICATOR
WILL BE ON. THE STROBE ILLUMINATOR WHICH IS LOCATED BENEATH THE SWTICH WILL LIGHT UP.
3. PUSH THE STANDBY BUTTON, STANDBY INDICATOR WILL BE OFF, UNIT IS READY FOR OPERATION.
SETTING THE CLOCK
1. WHEN THE STANDBY INDICATOR LIGHTS UP, THE UNIT IS IN THE STANDBY MODE.
2. DURING STANDBY MODE, SELECT BETWEEN 12H OR 24H CLOCK OPTIONS:
PRECAUTIONS FOR USE
16
Werbung
Inhaltsverzeichnis
