Before Use - auna multimedia 10000604 Bedienungsanleitung

BEFORE USE

1. Choose a safe location and avoid placing the unit in direct sunlight or near any heat source.
2. Avoid locations subject to vibrations, excessive dust, cold or moisture.
3. Do not open the cabinet as this may result in electrical shock. If a foreign object is inserted ac-
cidentally contact your dealer.
4. When removing the power plug from the wall outlet, pull directly on the plug, NOT the cord.
5. Do not attempt to clean the unit with chemical solvents as this might damage the finishing. A
clean, dry cloth is recommended for cleaning.
6. In order to completely turn off the unit, unplug the power cord from the wall outlet.
7. Keep this manual for future reference.
TURNTABLE PARTS
01. Platter
02. 45 rpm Adapter
03. Tone Arm
04. Lift Lever
05. Speed Selection
06. Auto Stop Control
07. Tone Arm Rest
08. USB Jack
09. RCA Output
11. Turntable Feet
12. Style (Needle) Cartridge
LISTENING to a RECORD
1. Connect the USB cord to PC.
2. Use a RCA cable to connect unit's RCA output 9 with your powered speaker. Make sure the red RCA
and white cables are inserted in the red and white jacks accordingly.
3. Place a record on the turntable and select the player speed (33/45/78) 6 according to the desired
record speed.
NOTE: when playing a 45 rpm record, use the 45 rpm adapter 2.
4. Remove the tone arm from the rest 7, push Lift Lever backward 5 to raise the tone arm and
gently move the tone arm to the desired position over the record. The turntable will begin to spin
when the arm is moved toward the record. Push the Lift Lever 5 forward lower the tone arm slowly
onto the desired position on the record to begin playing the record.
5. If Auto Stop Control 6 is turned ON, record will stop automatically when finished.
If Auto Stop Control 6 is turned OFF, record will NOT stop automatically when finished.
6. For best performance and product maintenance, unplug the Turntable when not in use.
6