Precautions & Maintenance - auna 10005071 Handbuch

1. If the car interior is extremely hot, as after being parked in the sun, do not use the player until
the car has been driven for a while to cool off the interior.
2. The protective case is to safely keep the front panel.
3. The unit is designed for negative terminal of the battery which is connected to the vehicle metal.
Please confirm it before installation.
4. Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it
may overload or burn out the power amplifier.
5. Do not install the detachable panel before connecting the wire.
OPEN BUTTON
1.
Press the OPEN button to fold down the front control panel.
Then a disc can be inserted into the disc slot or ejected by pressing the EJ button. After flipping down the
front panel, push it leftwards, then pull the right side of the panel outwards to remove it from the unit
chassis.
SEL BUTTON (Select) AND VOL KNOB
2.
a) Press the SEL button briefly, it is activated as selecting each mode of E. VOL. -> VOLUME ->BASS
->TREBLE -> BALANCE -> FADER ->
When selecting a desired audio mode, rotate the VOL knob to adjust the audio effect. In each mode, the
waiting time is about 5 seconds, and the time waiting time is over, it returns to the last display mode of
tuner or CDP mode. The control mode of E.VOL is operated with following numeric display.
- VOL: (MIN)00, 01, .................. 46, 47(MAX).
- BASS/TRE: -07, -06, ............... ,00,...+06,+07
- BAL: 0LR9, 1 LR9, ..., 9LR9,..., 9LR1, 9LR0
- FAD: 0FR9,1 FR9,..., 9FR9,..., 9FR1, 9FR0
b) When pressed longer 2 seconds, it is activated as cyclical mode of following functions for user's selection.
->TA (ALARM/SEEK) ->PI (SOUND/MUTE) ->RETUNE (LONG/SHORT) ->MASK(DPI/ALL) ->BEEP
(ON/OFF) -> USER SET(FLAT/CLASSIC/ ROCK/POP) ->VOL(LAST/DEFA) ->MONO/STEREO(only for FM
mode) ->LOUD(ON/OFF)->LOCAL/DX (only for FM mode) ->CLK(ON/OFF) ->CLK (12/24).
After selecting the desired mode, rotate the VOL knob to select one setup item of the desired mode.
PRECAUTIONS & MAINTENANCe
Location & Function of Controls