roco 10767 Kurzanleitung Seite 12

Analog reverse loop
The analog reverse loop reverses the main track polarity instead of the loop polarity. For an automatic
operation however a few details have to be observed. A seperate power supply is required to power the
module (14 – 24 V DC). A minimum driving voltage of 5 Volts is required to ensure a safe sensor operati-
on. Additional diodes must not be used. The reverse loop must always be operated in the same direction.
Alternatively the use of track contacts instead of sensor tracks is possible.
Analog reverse loop with sensor tracks
GB
12
Jumper
10767
IN OUT SENSOR PWR
Adjust
1 2 3 4
10727
Jumper
10767
IN OUT SENSOR PWR
Adjust
1 2 3 4
10727
10727
closed
10727
seperate power