Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)
calculating working load limits, installation material being used, and periodic safety inspection of all
installation material. If you lack these qualifications, do not attempt the installation yourself, but instead use a
professional structural rigger. Improper installation can result in bodily injury and.or damage to property.
The installation has to be attached out of the reach of people.
- - -m
Make sure that the projectors' minimum distance from lighted objects (symbol
) and the maximum
ambient temperature t
are never exceeded at the installation spot.
a
Caution: The loads have to be installed in a balanced way.
Install the luminaires on the fundamental part and do always install a safety-rope that can hold at least 12
times the weight of the fixture. You must only use safety-ropes with quick link with screw cap. Pull the safety-
rope through the attachment eyelet and over the trussing system or a safe fixation spot. Insert the end in the
quick link and tighten the safety screw.
Max. loads:
15/18
00026015.DOC, Version 1.1
Werbung
Inhaltsverzeichnis
