Scope Of Delivery; Accessories; Safety Instructions; General Safety Precautions - EFA SB295E Originalbetriebsanleitung

passive safety of the product.
Schmid & Wezel GmbH & Co. are not liable for
any damages resulting from the use of non-
authorised spare parts and special models.

1.6 Scope of delivery


Belt saw

Operating manual

1.7 Accessories

The order numbers both for the parts
contained in the scope of delivery as well as
for accessory parts are provided in Annex "List
of spare and wear parts".

Safety Instructions

2.

2.1 General safety precautions

Be sure to observe the following safety
precautions when working with the belt
saw.

Risk of injury!

When in operation, never
reach into the area of the saw
belt!
Improper use of the unit can
lead to parts being damaged!
Only use original spare parts
from EFA to guarantee the
unit functions perfectly!
Always wear the personal
protective equipment
recommended!

Changing the belt as well as installation,
maintenance and repair work may only be
carried out when the machine is
disconnected from the mains!

Operation presupposes that the operating
personnel has sufficient knowledge on the
use of the unit.

Expert training is provided by Schmid &
Wezel.

Installation, maintenance and repair work
may only be carried out by authorised and
qualified personnel.
Schmid & Wezel

Select personal protection equipment
according to the regulations applicable on
the premises and to the accident prevention
regulations in force.

The machine is equipped with a two-hand
safety circuit.
2.2 Behaviour at the place of
work

Keep your place of work tidy. Untidiness
can lead to accidents.

Give consideration to environmental
influences. Ensure good lighting (min. 500
lux).

Keep other people away from your place of
work. Work in a concentrated and sensible
manner. Do not use the belt saw when you
are unconcentrated and/or tired.

Do not wear loose clothing or jewellery as
these could become tangled up in moving
parts. Wear solid shoes when working.
Wear a hair net as a general rule!

Avoid abnormal body postures. Ensure a
safe working position and keep your
balance at all times.

Keep the belt saw in a safe place. Store the
unit in a dry place when not in use.

Use only original EFA accessories. Use of
other accessories will void the warranty.
Use of other tools or accessories may result
in injury to yourself.

Do not leave wrenches on the machine.
Check that all wrenches have been
removed before starting the machine.
Connecting, Starting Up and
3.
Operating Safety
Place of work
The operator's place of work should have a
surface of at least 1.5 m². No other working
location should overlap into this area,
otherwise a risk of injury could ensue due to
movements of the splitting saw.
The illumination at the place of work must be
at least 500 lux.

3.1 Installation

Switch off the splitting saw
before connecting to the
mains power supply!
Page
41 of 72
Version
11 / 2011