Klarstein 10033187 Bedienungsanleitung Seite 43

The semi-automatic cooking function
This function will allow you to set a countdown time similar to the minute minder function,
however the oven will switch off at the end of the cooking time.
1 Place the food that you want to cook inside of the oven and close the door.
2 Select an oven function and cooking temperature using the relevant control knobs
3 Press the programme button (12) three times. The decimal point, the "Oven in use"
symbol (8) and the "Automatic cooking" symbol (7) will flash on the LED display.
The display will show "00:00".
4 Use the plus (1 1) and minus (13) buttons to set the cooking time that you require.
5 The maximum countdown time that can be set is 10 hours.
6 When the correct countdown time appears on the LED display, release the plus and
minus buttons. Cooking will begin immediately, after a few seconds the countdown
time will start.
7 At the end of the cooking time the oven will turn off and an audible signal will
sound. The "Automatic cooking" symbol (7) and the "Minute minder" symbol (10)
will flash on the LED display.
8 To reset the oven and cancel the audible alarm, press any button once to stop the
alarm. Then press and hold the programme button (12) twice for 3 seconds. After
the first press the oven time will flash, and on the second press the "Oven in use"
symbol (8) appears on the LED display and the "Automatic cooking" symbol (7)
goes out.
Note: If you have not turned the oven function selector knob and thermostat control
knob to their "OFF" positions, when you reset the oven it will continue to heat.
The end of cooking function
This function is similar to the semi-automatic function, however instead of setting a
countdown time, you select the time of day that you want the oven to switch off at.
1 Place the food that you want to cook inside of the oven and close the door.
2 Select an oven function and cooking temperature using the relevant control knobs.
3 Press the programme button (12) four times. The decimal point starts to flash, and
the "Oven in use" symbol (8) and the "Automatic cooking" symbol (7) will light on
the LED display. The display will show the current time of day which will flash.
4 Use the plus (1 1) and minus (13) buttons to set the cooking end time that you
require.
5 The maximum end time that can be set is 10 hours into the future.
6 When the correct end time appears on the LED display, release the plus and minus
buttons. Cooking will begin immediately, after a few seconds the countdown time
will start.
7 At the end of the cooking time the oven will turn off and an audible signal will
sound. The "Automatic cooking" symbol (7) and the "Minute minder" symbol (10)
will flash on the LED display.
EN
43