Carbon Filter - Pkm S25-90 ABTH Bedienungsanleitung

5. Insert the grease filters and connect the appliance to the mains
 Check the correct position of the hood from front and side perspective.
Otherwise the appliance will not work properly.
Installation steps (recirculation mode)
1. If your home is not equipped with an air outlet for extracting exhaust air to the
outside, the exhaust hose is not required. The installation is similar to the
I
NSTALLATION STEPS

2.4 Carbon filter

Product code: CF 110.
WARNING! Unplug the appliance or disconnect it from the mains (use
the relevant fuse in your household fuse box).
WARNUNG! Use the carbon filters in recirculation mode only.
1. Remove the grease filter(s). The carbon filters are intended to be installed on
both sides of the motor.
If the socket is covered by the chimney, you must plug in the appliance at an
3
earlier point in
time.
(
EXTRACTION MODE
32
).
3 .