Pkm S25-90 ABTH Bedienungsanleitung Seite 33

2. Please note the following illustration:
L Turn to the left = Remove a previously installed carbon filter.
R Turn to the right = Place the carbon filter on the motor and turn the filter
to the left slightly or jerk it carefully until the filter is installed properly.
M Motor
3. Match the brackets of the filter with the holding mechanism of the motor and
jerk carefully until the filter locks.
Filter-brackets
4. Install the grease filter(s)..
NOTICE! Depending on frequency of use, replace the carbon filters
every three to six months. Clean the grease filter(s) regularly for proper
operation of the motor.
You can order carbon filters at
www.pkm-online.de
33
Carbon filter (installed)
Bracket (holding mechanism on
the motor)
Holding mechanism/motor