Pkm S25-90 ABTH Bedienungsanleitung Seite 30

2. Ø drill holes A/B = 8 mm
a) Drill the holes.
b) Insert the dowels.
3. Tighten the screws of the support openings (A/B), but leave free space of 10
mm between the screw head and the wall. Hang the hood on the screws.
4. Tighten the screws of the support openings (A/B) completely.
5. Screw the anchor screws (C/D) through the relevant openings completely into
the wall.
6. Install the one-way-valve on the air outlet of the hood. Then install the exhaust
hose on the one-way-valve as described below.
1) Exhaust hose
2) Hood
30