walterscheid SW40 Bedienungsanleitung Seite 90

REPLACING PROFILE TUBE
10. Clamp the profile tube (1) tightly in the
clamping profiles (3) using the hand pump
(2).
11. Drive out the clamping pin (4) carefully.
12. Move the mounting carriage (5) (see chap-
ter 6.3) to the back until the profile tube is
completely pulled out of the inboard yoke
(6).
13. Release the profile tube (1) in the clamping
profiles.
14. Remove the profile tube from the special
tool.
Fig. 22
39