5
Initial Commissioning
5.1
Connecting special tool to the hydraulic hand pump
INITIAL COMMISSIONING
The special tool is only permitted to be operated by the hydraulic
hand pump supplied by us or using the pneumatically driven hydraulic
unit supplied by us.
The special tool is prepared as standard for the direct connection to
the hydraulic hand pump. The special tool can also optionally be con-
nected to the pneumatically driven hydraulic unit.
Check the oil level of the hydraulic hand pump or the hydraulic unit. If
required, fill with hydraulic oil HLP 46.
Fig. 9
1. Secure the special tool (1) against moving on a stable worktop.
2. Connect the hydraulic hose lines (2) and (3) to the connections
(4) and (5) of the hydraulic hand pump.
The special tool is ready for use.
→
Ensure that the hydraulic connectors engage in the hydraulic sleeves.
32