Operation - Klarfit Workspace Go Light Handbuch

EN
26

OPERATION

General Operation
• Plug in the power, turn on the switch (the switch is red), it will light up,
then you will hear the „drop", then the screen will light up.
• When not using the treadmill, please keep the safety lock out of reach of
the child; The silicone oil bottle in the accessory bag is kept in the place
where the child can't reach it. If accidental ingestion or eye contact occurs,
please rinse it with water and visit the doctor in time.
• Before setting up, turn off the mechatronics switch and unplug the power
plug. Lift up the treadmill with your hand and put it against the wall.
Remote control
Press the red start/stop button on the remote control, and the treadmill starts
up. After the exercise, press the machine to stop. The machine head panel also
has the start stop button. The function is the same.
Speed up / down button: The treadmill can be used to adjust the speed, step by
step and automatically increase or decrease when holding down more than 2
seconds.
Speed (+)
Start/Stop
Speed (-)