Jet JBS-12 Gebrauchsanleitung Seite 10

Auxiliary fence for rip fence:
For your own safety always set the upper saw guide as close to
the workpiece as possible.
For narrow shallow cuts on the rip fence a self-made auxiliary
fence (E, Fig. 20) made of cutable material ( e.g. wood, plastic,
aluminium) must be used.
Length same as rip fence.
Fig 20
Performing diagonal cuts
Mitre gauge:
Place the mitre gauge in the table T-slot.
Directions for "safe operation" :
Tenon cutting
Performing high resaw cuts
10