Your Boreal Wood-Burning Stove At A Single Glance; Installation; Lighting The Stove - WANDERS Boreal Gebrauchsanweisung Und Montage Vorschriften

Your Boreal wood-burning stove at a
single glance
The Boreal
The Boreal is available in various models and there is
even a rotatable version. The rotatable hearth can turn
120º at most while meeting all fire safety standards. The
stove can be rotated gradually (15°). The Boreal stove is
provided with an energy-saving valve in the pipe socket
for having a higher output during operation. The Boreal
also has the option for connecting an external air supply
(only via the bottom side).
The air supply needed for fuel combustion can be
adjusted with a rotating air valve. Combustion air is
heated by an ingenious air circulation system, which
is then combusted via a window cleaning system.
This technique gives cleaner combustion and at the
same time a higher heat output, which means less fuel
consumption. The Boreal is a combination of comfort
and efficient heat output. The stove has an outside cover
and an interior chamber. This ensures that the stove
radiates 60% of the heat output through convection to
your room while the remaining 40% heat is released
through radiation via the glass area.
Please note: The glass side of the hearth must never face
the wall or other flammable materials during lighting and
for the following two hours after using the hearth.

Installation

It is common practice for the dealer where you purchased
your stove to also take care of installing it. If this is not
the case, please ensure that the installation is done by a
certified installer. A certified installer can also give you
the right advice about the flue tube to which the stove
must be connected. Connecting wood-burning stoves
by unqualified persons is prohibited, in which case we
cannot give any guarantee about proper functioning
of your stove. Please bear the fire safety in mind when
installing the stove. See also page 20.
The wood-burning stove is suitable as an extra heat
source and does not replace your principal heating
device.
It is not allowed to have wood-burning stoves connected
by unqualified installers. In such case we cannot give
any guarantee that the Boreal will work properly.

Lighting the stove

Lighting your stove early in autumn or late in
winter
When the external and internal temperatures do
not differ much, a proper chimney draught is a real
challenge. You can help chimney draught get started
by burning some wood while keeping all air inlets
maximally open. An abundant air supply speeds up
quick heating which in turn increases the draught
in the chimney. Lighting up the stove with only a
little wood prevents smoke from streaming into the
room.
The stove will become very hot when you light it and
will need at least two hours to cool off. Don't touch the
stove without protection during firing and for two hours
after. Handle the stove always with a glove to avoid
getting serious burns.
Opening the door
17