Your Peppel Stove At A Single Glance; Installation; Lighting The Stove For The First Time - WANDERS Peppel Bedienungsanleitung Und Montagevorschriften

GB

Your Peppel stove at a single glance

Installation

It is common practice for the dealer where you purchased your Peppel stove to also take care of installing it. If this is not the
case, please ensure that the installation is done by a certified installer
national and currently applicable local regulations
tube to which the stove must be connected. Connecting wood-burning stoves by unqualified persons is prohibited, in which
case we cannot give any guarantee about proper functioning of your Peppel stove. Please bear the fire safety in mind when
installing the stove. See also page 19.
The wood stove is intended for extra heating and does not replace a proper central-heating system.
The wood stove is suitable and approved for occasional use. Continual use leads to a shorter life span of the
product.
The wood stove may not be modified in any way without the written permission of the manufacturer.

Lighting the stove for the first time

Discolouration of walls, ceilings and grates
The walls, ceilings and grates may show some discolouration after lighting your stove. This is caused by the dust
particles that burn in the convection cover. WANDERS cannot be held responsible for this natural process. To
minimize discolouring we refer to the advice given for atmospheric hearths. Your installer can give you more
information about this.
When you light the Peppel for the first time, the hearth must still 'anneal' and temper itself. The unit has a heat resistant lacquer
which must burn in the stove at temperatures above 400 °Celsius. This will happen during the first few times of lighting the
stove and temperatures rise to 600 °C. Though this may give an unpleasant smell, it is otherwise harmless. It is advisable to
keep the stove burning with limited fuel for at least 6 hours when lighting the stove for the first 4 or 5 times. Air the room well
when the stove is burning. Make sure that any cooking hood is not turned on when the stove is burning; a cooking hood
extracts the combustion air that the stove needs.
Some deposit may form on the glass panes of the stove when you 'anneal' your hearth. You can easily remove this deposit
with a damp cloth after the stove has cooled down. You can also use some cleansing agent for ceramic rings. Please make sure
you do not leave any finger marks on the clean glass. Finger marks burn into the glass and cannot be removed later.
Newly built house or recently renovated?
It is advisable to wait six weeks before lighting the stove in a newly built house that has recently been completed,
or in a space that has recently been renovated drastically. The walls and ceilings still contain gases, softeners and
moisture from plasterwork or paint. The warm air-streams may discolour the dust particles in the space, which
may stick to walls and ceilings. Even the moisture in the walls and ceilings will become warm and may cause
yellow stains.
14
The Peppel is a combination of comfort and efficient
heat emission. The large glass panes allow emission of
the heat from the stove directly to the environment to
make your room instantly comfortable. The built-in flue
gas deflector ensures circulation of flue gases in the
interior parts. Combined with the extra after-burning,
it means that the flue gases have better combustion
and reduce the burden on the environment. You
can regulate the intake of combustion air with the
integrated air slide valve and adjust the intensity of
the fire and the output of your stove.
in accordance with the installation instructions and
. A certified installer can also give you the right advice about the flue