AVM FRITZ!WLAN Repeater 310 Installations- Und Bedienungansleitung Seite 5

Connecting the FRITZ!WLAN Repeater 310 Using the Wizard
1. Insert the FRITZ!WLAN Repeater 310 in
an outlet in the vicinity of your wireless
access point (for instance, a FRITZ!Box).
2. Start the wireless LAN software on your
computer, select the wireless radio
network of your FRITZ!WLAN Repeater
310 and establish a connection.
3. Enter the network key. In the
FRITZ!WLAN Repeater 310 the network
key is preset to 00000000 (eight zeros).
The computer establishes a connection
to the FRITZ!WLAN Repeater 310. Once
the connection has been estab-
lished,the "Power", "WLAN" and "
LEDs light up.
4. Insert the FRITZ!WLAN Repeater in an
outlet located about halfway between
your wireless access point and the
wireless devices to be added to the
wireless network.
Starting the Confi guration Wizard
1. Open the web browser on your comput-
er and enter http://fritz.repeater
address bar. The confi guration wizard
appears.
2. The wizard guides you through con-
fi guration of the wireless connection
between the FRITZ!WLAN Repeater 310
and your wireless access point.
The FRITZ!WLAN Repeater 310 is connect-
ed with your home network by wireless
LAN. Check the settings and perform an
update if necessary. Continue reading on
page 9.
"
8
FRITZ!WLAN Repeater 310 in the Home Network
On a FRITZ!Box with FRITZ!OS version 6.90 or higher
During registration with FRITZ!Boxes with FRITZ!OS 6.90 or higher, the FRITZ!WLAN
•
in the Repeater 310 automatically adopts the FRITZ!Box's wireless LAN settings.
When settings on the FRITZ!Box are changed, the FRITZ!WLAN Repeater 310 adopts
•
these changes automatically.
Updates for the FRITZ!WLAN Repeater 310 can be performed directly in the FRITZ!Box
•
user interface under Home Network / Home Network Overview.
The FRITZ!WLAN Repeater 310 benefi ts from expanded Mesh WiFi functionality. Note the
•
instructions at en.avm.de/mesh-networking.
On a FRITZ!Box with FRITZ!OS up to Version 6.6x
During registration with FRITZ!Boxes with FRITZ!OS up to version 6.6x, FRITZ!WLAN
•
Repeater 310 automatically adopts the FRITZ!Box's wireless LAN settings.
Updates for the FRITZ!WLAN Repeater 310 can be performed directly in the FRITZ!Box
•
user interface under Home Network / Home Network Overview.
9