Connecting the FRITZ!WLAN Repeater 310 with Wireless LAN at
the Touch of a Button
1. Insert the FRITZ!WLAN Repeater 310 in an outlet in the vicinity of your wireless access
point (for instance, a FRITZ!Box).
2. Press the "WPS" button on the FRITZ!WLAN Repeater 310 until the "WLAN" LED starts
to fl ash.
3. Within two minutes, press the button on your wireless access point that initiates WPS.
For more information, see the documentation of this device.
The FRITZ!WLAN Repeater 310 adopts the SSID (radio network name) and the network
key from your wireless access point and establishes a secure wireless connection.
"Power", "WLAN" and "
" light up.
4. Insert the FRITZ!WLAN Repeater in an outlet located about halfway between your wire-
less access point and the wireless devices to be added to the wireless network.
The FRITZ!WLAN Repeater 310 is connected with your home network by wireless LAN.
Check the settings and perform an update if necessary. Continue on page 9.
6
1
2
3
4
WPS
Power
WLAN
Wireless LAN
7