AVM FRITZ!WLAN Repeater 310 Installations- Und Bedienungansleitung Seite 3

LEDs
The LEDs show the operating status:
on
Quality of the wireless
radio signal
Power FRITZ!WLAN Repeater 310
is ready for operation
Wireless LAN function
WLAN
enabled
all
fl ashing
Connection to the wireless access point is
interrupted
The FRITZ!WLAN Repeater 310 is being
•
started
Updating FRITZ!OS
•
WPS in progress; fl ashes fast: WPS was
•
aborted
Enabling Mesh WiFi
•
Adopting the wireless LAN settings
•
Loading factory settings
4
"WPS" Button
With the "WPS" button you operate the
FRITZ!WLAN Repeater 310:
Press the "WPS"
Button
Initiate WPS / 1 second
Enable Mesh WiFi
Connect with 6 seconds
another access
point
Factory settings 15 seconds
Security
Operate the FRITZ!WLAN Repeater
•
310 in a dry place that is free of dust.
Provide for suffi cient ventilation.
FRITZ!WLAN Repeater 310 is in-
•
tended for indoor use only. Never let
liquids get inside the housing.
Insert the FRITZ!WLAN Repeater
•
310 into an electrical outlet that is
easy to reach.
Do not open the FRITZ!WLAN Re-
•
peater 310 housing.
Unplug the FRITZ!WLAN Repeater
•
310 from the outlet before cleaning.
5