Safety Instructions - Megasat HD 935 Twin V2 Bedienungsanleitung

Safety instructions

Please read the manual thoroughly before operating the equipment. In case of incorrect
or improper handling, the warranty becomes void.
Power supply:
Before start please check the correct operation voltage of the power point. The opera-
ting voltage of this device is AC 100~240 V, 50/60Hz.
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged power
cord or touch it with wet hand as this may result in electric shock.
Liquid:
The device shall not be exposed to dripping or splashing water, and that no objects filled
with liquids, such as base, shall be placed on the apparatus.
Ventilation:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit. Do
not expose the receiver to direct light or do not place it near a heater or in humid condi-
tions. Do no stack other electronic equipments on top of the receiver.
Risk of suffocation:
Do not let children play with films or other packaging components, there is a risk of suf-
focation.
Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean the receiver by a soft
cloth or mild solution of washing-up liquid (no solvents).
Uncover:
Do not remove the cover, to reduce the risk of electric shock. Contact qualified and licen-
sed service personnel to repair the receiver, or contact your dealer.
ENGLISH
03