nemaxx FCA35X Originalbetriebsanleitung Seite 8

STEP 2
The brackets position has been marked on the awning set at factory.
Measure the awning width with a ruler and note the bracket position.
Draw a horizontal line in the position of required height as shown in the diagram by using a
long ruler, spirit level and chalk.
Make marks on the wall, through the holes at the base of the bracket.
The quantity of the wall brackets is based on the awning width.
Awning width
Brackets
Bracket
position
EN
≤ 3,3m
2 pcs
Chalk line ( use spirit level for accuracy )
Bracket
position
Patio doors
Floor
3,3m-4,5m
3 pcs
Patio doors
8
KEN001VKM
v03 • 07.09.2017
5,5m-6,0m
4 pcs
Bracket
position