Limited Adjustment Of Motor - nemaxx FCA35X Originalbetriebsanleitung

LIMITED ADJUSTMENT OF MOTOR

The most ideal state of the tubular motor is pre set at the factory and should not require
any major adjustment in the process of using.
In case of the following conditions, the motor needs limited adjustment.
• The awning canot close completely.
• The cover is loose.
• The motor is still working, while the awning is completely closed.
Useful tips
If you want to change the distance of projection, please use the motor adjustor to adjust
the motor, "-" for increasing distance, "+" for decreasing the distance.
Tool
Motor adjustor
Adjusting mark
Motor operating direction
Notes
1. If the motor does not work after several times of adjustment, please wait 30 minutes to
restart.
2. The motor must not be over heated and over frequently used, so as to prolong the it's
lifespan.
3. The motor should be kept away from water, during delivery, storage or working.
Receiver built in the motor
It is not necessary to do any adjustment or programming on the receiver while installing the
awning.
EN
Adjusting vent
13
KEN001VKM
v03 • 07.09.2017