Audio Sources; Connecting Two Or More Pa Systems In Series; Connector Configuration - Omnitronic WAMS-JOBT Bedienungsanleitung

Audio Sources

As signal source, microphones, music instruments and audio units with line level can be connected.
1
Connect units with stereo line output (e.g. keyboard, CD player or laptop) to the RCA jacks CD/TAPE IN
or the 3.5 mm jack input AUX of channel 1. When connecting the AUX input, the RCA input is muted.
2
Combo inputs of channel 2 and 3 connect dynamic microphones or instruments with mono line level
output via XLR or 6.3 mm plugs.

Connecting Two or More PA Systems in Series

For larger indoor PA applications where the sound has to be radiated as even as possible, two or more PA
systems may be connected in series. For this connect your signal sources to the primary unit and connect
the mono line output LINE OUT to one of the adjustable line inputs of the first secondary unit. Connect
further units likewise. The output LINE OUT provides the mixed signal of the signal sources adjusted with the
individual level controls and the tone controls. Alternatively, you can connect other units with line level inputs
(e.g. mixer, recording unit) to the output.

Connector Configuration

6-2 Link connection
36