Installation - urmet NVR Boost 3.0 Serie Kurzanleitung

Installation

Use a monitor with VGA or HDMI input for device start-up. Carefully follow the instructions below.
4 HDD housing's rear panel
2 HDD housing's rear panel
4 HDD housing's rear panel (with PoE)
7
1
USB port
2
HDMI output
3
VGA output
4
Network cable port
Before installing the NVR, check that IP cameras are properly working and connected (via cable or WiFi) to the
same network as the NVR. For more details about camera configurations see the instructions provided with
cameras.
3 6
4 2 1 5
3
4
2 1
3
4 1
2
21
6
5
6
5
5
Plugs
6
Switches
7
Straight Cat. 5 cable ports
EN