Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance; Cleaning; Warranty Service Information - Hatco TPT-230-4 Serie Installations- Und Bedienungshandbuch

Industrietoaster
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 11

MAINTENANCE

CLEANING

The Hatco Commercial Toaster is designed for maximum
durability and performance, with minimum maintenance.
WARNING
To avoid any injury, unplug the toaster from the power
source and allow to cool completely before performing any
maintenance, cleaning, or attempting to clear a jam.
WARNING
Units are not waterproof. DO NOT submerge in water. Do
not operate if unit has been submerged in water.
WARNING
To avoid electrical shock or personal injury, do not steam
clean or use excessive water on the unit.
WARNING
To avoid any injury, do not clean the unit when unit is
energized or hot.
WARNING
This appliance is not jet-proof construction. To assure safe
and proper operation do not use jet-clean-spray to clean
this appliance.
CAUTION
To avoid any injury, do not remove the crumb tray for
cleaning until the toaster is cool.
NOTICE
Use only non-abrasive cleaners. Abrasive cleaners could
scratch the finish of your unit, marring its appearance and
making it susceptible to dirt accumulation.

WARRANTY SERVICE INFORMATION

The warranty on Hatco TPT-230-4 Series toasters is for one
year from date of purchase or eighteen months from date of
shipping from Hatco, which ever occurs first. This is a parts
only warranty. (Labor is not covered.)
If you experience a problem with a TPT-230-4 Series toaster
during the warranty period please do the following:
Contact Local Hatco Dealer
When contacting Hatco Dealer for service assistance, please
supply dealer with the following information to assure prompt
processing:
• Model of Unit
• Serial Number (located on the bottom of the unit)
• Specific Problem with the Toaster
• Date of Purchase
• Name of your Business
• Shipping Address
• Contact Name and Phone Number
Form No. TPT2304CEM-1107
To preserve the finish of the toaster, it is recommended that the
metal surfaces be wiped daily with a damp cloth.
1. Remove the crumb tray and empty.
2. Wash crumb tray with warm water and a mild detergent,
rinse with water.
3. Allow crumb tray to air dry or hand dry with a soft cloth
before placing back into the toaster.
4. Wipe exterior surface of toaster with a damp cloth.
If service is required on this unit, contact your Authorized
Hatco Service Agent, or contact the Hatco Service
Department at 414-671-6350;
3976.
This product has no "user" serviceable parts. To avoid
damage to the unit or injury to personnel, use only
Authorized Hatco Service Agents and Genuine Hatco
Replacement Parts when service is required.
Genuine Hatco Replacement Parts are specified to operate
safely in the environments in which they are used. Some
aftermarket or generic replacement parts do not have the
characteristics that will allow them to operate safely in
Hatco equipment. It is essential to use Hatco Replacement
Parts when repairing Hatco equipment. Failure to use
Hatco Replacement Parts may subject operators of the
equipment to hazardous electrical voltage, resulting in
electrical shock or burn.
Hatco Dealer will do the following:
• Provide replacement part(s) as required
• Submit warranty claim to Hatco for processing
6
WARNING
International fax 414-671-
WARNING
WARNING

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis