Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4
MicroLogix™ Ethernet Interface
Specifications
Description
24V dc Power Source Requirement
24V dc Current Draw
Maximum Inrush Current
Internal Isolation
Operating Ambient Temperature
Storage Temperature
Shock
Vibration
Agency Certification
(1) Shielded Ethernet cable required for marine certification.
For More Information
For more information on the MicroLogix Ethernet Interface, refer to publication
1761-UM006. Download a free electronic version of this publication from:
www.rockwellautomation.com/literature.
Safety Considerations
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D, or
non-hazardous locations only. The following WARNING statement applies to use in
hazardous locations.
Publication 1761-IN007B-MU-P
Specification
20.4 to 26.4V dc
50 mA typical, 100 mA maximum
200 mA
710V dc for one minute
0° C to +60° C (+32° F to +140° F)
-40° C to +85° C (-40° F to +175° F)
operating: 30g, ±3 times each axis
non-operating: 35g (DIN rail mount)
50g (panel mount), ±3 times each axis
operating: 10 to 500 Hz, 5.0g, 0.030 in. peak-to-peak, 2 hours each
axis
(1)
UL 1604
C-UL C22.2 No. 213
Class I Division 2 Groups A,B,C,D
CE compliant for all applicable directives
C-Tick marked for all applicable acts
Werbung
Inhaltsverzeichnis
