Installation And Connection; Operating - Bartscher Mini 2 Bedienungsanleitung

5.2 Installation and connection

CAUTION!
The installation and maintenance of the appliance should only be carried out by
trained personnel!
•
Discard the complete packing material after unpacking the device.
•
Carefully remove the protective foil from internal surfaces to avoid leaving any
adhesive tape. If any adhesive tape does remain stuck, remove it using an
appropriate agent.
•
Place the device on top of an even and safe surface which supports the weight of the
device and is not heat sensitive.
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
Do not place the unit near walls or other objects made of flammable materials. Keep
a minimum distance of 20 cm on all sides of the unit.
•
The unit is equipped with adjustable legs to help it rest evenly. They should be used to
place the unit in a level position.
•
Place the unit in a well-ventilated area.
•
Place the unit under a kitchen hood to remove steam and odours.
•
Never cover the pizza oven with towels or cloths, do not hang any objects on the unit.
•
The unit can be installed separately or in a series along with other units.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
unit directly to the wall socket; do not use any extension cords or power strips.
•
Position the device in a way so that the power plug is always accessible.

5.3 Operating

•
Clean the unit prior to first use (see 6.2 Cleaning).
•
Connect the unit to an appropriate single-plug outlet.
•
Prior to placing food in the unit, turn it on at maximum power for approx. 20-25 minutes
in a very well ventilated area.
CAUTION!
Always preheat the unit for 20-25 min. before using!
- 26 -