Philips Respironics DreamWear Bedienungsanleitung Seite 7

Putting on the Mask
1. With the mask assembled (see Assembly section), place the
cushion under the nose. b
2. Position the frame on the top of your head. c
Tip: For proper sizing, see Cushion Sizing and Mask Frame
Selection sections.
3. Pull the headgear over the back of the head. d
4. Attach the magnetic headgear clips to the mask cushion. e
2
Adjusting the Mask
1. Peel the headgear tabs away from the fabric. Adjust the length of
the top straps. Press the tabs back against the fabric to reattach.
Repeat this step with the bottom straps. f
Note: Do not overtighten the headgear. Signs of overtightening
include redness, sores, or bulging skin around the edges of the
mask.
2. Position the mask until it fits comfortably. g
3. When finished the elbow should rest at the top of the head. h
6
3
4
7
7
5
8