Optional Accessories; Sr 40 Single/Dual Receivers; Front Panel - AKG WMS 40 SINGLE Bedienungsanleitung

WMS 40 SD_07_Hex 12/20/2007
Kits with SR 40 DUAL receiver

2.3 Optional Accessories

2.4 SR 40 SINGLE/DUAL Receivers

2.4.1 Front Panel

Fig. 1: Front panel controls on
SR 40 DUAL receiver.
16
11:26 Seite 16 (Schwarz/Black Auszug)
2 Description
GUITAR/VOCAL SET DUAL
1 PT 40 PRO bodypack transmitter
1 AA size battery
1 set of lettering labels
1 C 555 L head-worn microphone
2 moisture shields
1 W 444 windscreen
1 GB 40 Guitarbug with user manual
1 AAA size battery
1 adapter plug
1 SR 40 DUAL receiver
1 AC adapter (see sticker on packaging)
1 Manual Supplement sheet
INSTRUMENTAL SET DUAL
2 PT 40 bodypack transmitters
2 AA size batteries
1 set of lettering labels
2 MKG L guitar cables
1 SR 40 DUAL receiver
1 AC adapter (see sticker on packaging)
1 Manual Supplement sheet
• Check that the packaging contains all of the items listed for your system. Should any item be missing, please con-
tact your AKG dealer.
• For optional accessories, refer to the current AKG catalog or folder, or visit www.akg.com.
Your dealer will be glad to help.
The SR 40 SINGLE/DUAL series includes two stationary receivers for use with all WMS 40 and Microtools Series trans-
mitters. They feature a half-rack case for mounting in a 19" rack.
The SR 40 SINGLE provides a single reception channel and operates on one fixed, quartz stabilized frequency in the
660 MHz to 865 MHz UHF carrier frequency range.
The SR 40 DUAL combines two SR 40 SINGLE receiver channels in one half-rack case. Each channel operates on a
separate frequency.
1 ON/OFF: On/off pushbutton switch with status LED.
2 Antenna (1 per channel): Fixed-length UHF antenna permanently mounted on the front panel.
3 VOLUME (1 per channel): This rotary control adjusts the receiver's output level from microphone to line level for
matching to the input sensitivity of your mixer or amplifier.
4 RF OK (1 per channel): This LED illuminates to indicate that signal is being received. If no signal is received or the
automatic squelch is on, the RF OK LED goes out and the audio output is muted.
5 AF CLIP (1 per channel): This LED illuminates to indicate the audio level of the received signal is overloading the
receiver's audio section.
6 Color code lines: The color indicates the carrier frequency of the respective receiver channel. Both the SR 40 SIN-
GLE and the SR 40 DUAL have two color code lines. On the SR 40 SINGLE, both color code lines are of the same
color. Transmitters tuned to the same frequency are marked with the same color. Refer to the Manual Supplement
sheet for a color code table.
PRESENTER SET DUAL
1 HT 40 handheld transmitter
1 stand adapter
1 semitransparent replacement clip
1 PT 40 PRO bodypack transmitter
2 AA size batteries
1 set of lettering labels
1 C 555 L head-worn microphone
2 moisture shields
1 W 444 windscreen
1 SR 40 DUAL receiver
1 AC adapter (see sticker on packaging)
1 Manual Supplement sheet
VOCAL SET DUAL
2 HT 40 handheld transmitters
2 stand adapters
2 AA size batteries
2 semitransparent replacement clips
1 SR 40 DUAL receiver
1 AC adapter (see sticker on packaging)
1 Manual Supplement sheet
WMS 40 SINGLE/DUAL