Troubleshooting - ADS TECH PYRO A/V Link Handbuch

Trouble Shooting
Video will not Preview in VideoStudio or other video editing software
Check and Make sure that the PYRO A/V Link is connected properly to your
computer. To check if PYRO A/V Link is recognized please go to page 15 of
this manual.
VideoStudio will not transcode DV to MPEG2 properly, dropped frames etc.
This problem is mostly related to lack of SYSTEM RESOURCES. Your
computer might not be fast enough, your hard drive might not be optimized
(defragged), your video card might not be AGP Etc. Real Time DV to MPEG2
transcoding requires a lot of horsepower. ADS Technologies guarantees
continuous DV to MPEG2 Transcode for up to 2.5 Hours on a P4, 1.8GHZ
Machine.
VideoStudio or my Video Capture Application hangs for awhile after I stop
capturing
This might happen in really long captures. This is normal. Remember that you
are capturing and manipulating files in the Gigabytes range. Stop the capture
and wait several seconds, your capture software or VideoStudio should go
back to normal.
Selecting PAL as your template results in a video captured as NTSC
Restart VideoStudio or your video capture application. Select PAL again. This
should fix the problem.
PYRO A/V LINK 39