ADS TECH PYRO A/V Link Handbuch Seite 28

4.) Use the MODE SELECTOR SWITCH on the front of the PYRO A/V Link
device to switch to DIGITAL MODE. In this mode, the BLUE LED should
be lit.
5.) Apply Power to the VCR and press RECORD just before you press PLAY
on your digital camcorder.
Add a Preview Monitor to this Configuration
You can preview and record video to a VCR at the same time as long as the VCR
allows for audio and video to be passed through it. Check and test your VCR to
ensure that it has audio and video inputs and outputs and they allow pass through
of audio and video while recording.
1.) Connect a video cable from the RCA or S-VHS OUT jacks on the back of
the PYRO A/V Link and into the Video In on your VCR.
2.) Connect an RCA or S-VHS cable to the Video Out on your VCR to an
external video input (RCA or S-VHS) on your TV.
3.) Connect an audio cable to the Left and Right RCA audio OUT jacks on the
back of the PYRO A/V Link to the audio inputs (RCA) on your VCR.
4.) Connect an audio cable between the Left and Right RCA OUT on your
VCR to the Audio INPUTS on your TV.
5.) Apply Power to the VCR – You may have to change the TV/VCR switch on
the VCR to allow pass through.
6.) Apply Power to the TV and switch the TV to accept the external video
source. (Check your TV manual if you are not sure how to do this.)
PYRO A/V LINK 28