Connecting For Capture From Dv Camcorder - ADS TECH PYRO A/V Link Handbuch

Connecting for Capture from DV Camcorder

If you are using a Digital Camcorder to capture and or export video you can do
this by simply connecting the Digital camcorder directly to the 1394 port on your
computer.
For your convenience the PYRO A/V Link provides a 4 pin DV In/Out connection,
thus acting as a 1394 desktop Hub and allowing easier connection to your
computer.
1.) Connect a 4 pin to 4 pin DV cable between the DV In/Out connection on
your digital camcorder to the 4 Pin DV IN port on the front of the
PYRO A/V Link.
2.) Turn your Camcorder on to VCR/VTR mode.
3.) The Digital Camcorder will be recognized by the computer and
Windows(WinXP) will show all compatible software that can be used with
the digital camcorder (see Box). Select the video capture or
editing application you want to use.
4.) If this selection box does not appear, Start your Video Editing software the
old fashion way.
PYRO A/V LINK 23