Rear Panel; Position Dip Switch - ADS TECH PYRO A/V Link Handbuch

Rear Panel:

The back of the PYRO A/V Link is for all of the audio and Video Outputs with the
exception of the Component Video inputs.
• The video input jacks are auto-sensing. Which ever video jack you connect (RCA, S-Video or
Component) the jack with the active video source will automatically be selected.
• The video output jacks will automatically be active. In all configurations the RCA and S-Video jacks will
always be simultaneously outputting video. This is true for video pass-through mode and exporting DV to
Analog video mode.
• The Component Video jacks are dual purpose and bi-directional. You can capture from analog video
sources via the component jacks and you can export DV to Analog video via the Component jacks. The
jacks are auto-sensing and auto-switching. This means that if ANY video input jack is capturing analog video
to DV, the Component jacks switch to video input mode. If you are exporting to Analog Video the
Component jacks switch to component video export.

4 Position Dip Switch

POSITION:
UP
DOWN NTSC
Fig. B
1 2
PAL See Next Page
See Next Page
PYRO A/V LINK 10
3
See Next Page
See Next Page
Fig. A
4
Unlock Audio
Locked Audio