Exporting To A Digital Camcorder - ADS TECH PYRO A/V Link Handbuch

2.) Connect an audio cable to the Left and Right RCA audio OUT jacks on
the back of the PYRO A/V Link to the external audio inputs (RCA)
on your VCR.
Note: If you are recording back to a camcorder, you may need to use
the cables provide by the camcorder manufacturer.
3.) Apply Power to the VCR and press RECORD just before you begin
exporting video from your computers video editing software.
Note: Each video editing software program will offer a slightly different method for
exporting video. Some software will allow export from timeline without rendering
the video and others will require that you "Save" your video and then "Print to
Tape". Please check the user guide for your video editing software to learn how
to export video.

Exporting to a Digital Camcorder

If you want to export from your video editor to a digital camcorder, you can
accomplish this by connecting the camcorder directly to the 1394 port. However,
you can also use the PYRO A/V Link as your 1394 connection and export DV
through the A/V Link and into your digital camcorder.
The setup is the same as if you used A/V Link as your Digital camcorder
capture connection.
1.) Connect a 4 pin to 4 pin DV cable between the DV In/Out connection on
your digital camcorder to the 4 Pin DV In/Out port on the PYRO A/V Link.
2.) Turn your Camcorder on to VCR/VTR mode.
3.) The Digital Camcorder will be recognized by the computer.
4.) Start your Video Editing software, Use the export or Print to Tape function
in the software to export video from your computer and record in the
digital camcorder.
PYRO A/V LINK 25