Inhaltsverzeichnis; Declaration Of Conformity; Warranty; Safety - Jet DC-1100CK Gebrauchsanleitung

GB - ENGLISH
Operating Instructions
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new JET-product. This manual has been
prepared for the owner and operators of a JET DC-1100A / DC-1100CK dust collector to promote safety during installation,
operation and maintenance procedures. Please read and understand the information contained in these operating
instructions and the accompanying documents. To obtain maximum life and efficiency from your dust collector, and to use
it safely, read this manual thoroughly and follow instructions carefully.
...Table of Contents
1. Declaration of conformity
2. Warranty
3. Safety
Authorized use
General safety notes
Remaining hazards
4. Machine specifications
Technical data
Noise emission
Contents of delivery
5. Assembly and start up
Assembly
Dust collection
Mains connection
6. Machine operation
7. Maintenance and inspection
Cleaning filter
Changing collector bag
8. Trouble shooting
9. Environmental protection
10. Available accessories

1. Declaration of conformity

On our own responsibility we hereby declare that this
product complies with the regulations listed on page 2.

2. Warranty

TOOL France SARL guarantees that the supplied
product(s) is/are free from material defects and
manufacturing faults.
This warranty does not cover any defects which are
caused, either directly or indirectly, by incorrect use,
carelessness, damage due to accidents, repairs or
inadequate maintenance or cleaning as well as normal
wear and tear.
Further details on warranty (e.g. warranty period) can be
found in the General Terms and Conditions (GTC) that are
an integral part of the contract.
These GTC may be viewed on the website of your dealer
or sent to you upon request.
TOOL France SARL reserves the right to make changes to
the product and accessories at any time.

3. Safety

3.1 Authorized use

This dust collector is designed for sucking wood dust only.
Any other application is not permitted and may be carried
out in specific cases only after consulting with the
manufacturer.
This dust collector is not suitable for sucking poisonous
gases, any liquids or foams, hot substances, easily
flammable substances.
Materials such as liquids, metal shavings, metal dust,
screws, glass, plastic or rock can cause sparks and/or
damage when coming into contact with any part of the
dust collector.
The product is not suitable for use in wet or humid
environment.
Don't use appliance in places with a risk of explosion.
The proper use also includes compliance with the
operating and maintenance instructions given in this
manual.
The dust collector must be operated only by persons
familiar with its operation and maintenance and who are
familiar with its hazards.
The required minimum age must be observed.
The dust collector must only be used in a technically
perfect condition, with filter and collection bag in
position.
Before connecting the dust collector to electric power, all
safety mechanisms and covers must be mounted.
In addition to the safety requirements contained in these
operating instructions and your country's applicable
regulations, you should observe the generally recognized
technical rules concerning the dust collection on
woodworking machines.