Jet DC-1100CK Gebrauchsanleitung Seite 7

Collector bag:
Fold the plastic bag over the top of the snap ring (E, Fig
8).
Insert the snap ring (E) of the collector bag into the
bottom of the housing at an angle. Pull down until it
engages in the grove (F, Fig 9)
Filter bag (DC-1100A):
Attach the bag support rods (A, B Fig 10).
Fig 8
Fig 9
Install the filter bag with retainer strap (D).
Canister filter (DC-1100CK):
Mount the handle (I, Fig 11) with 2 hex nuts (G), flat
wasshers (H) and a lock washer (J).
Mount the canister filter with 4 knobs (K) on the collector
housing.
Fig 10
Fig 11