dirna Bergstrom bycool green line COMPACT 1.4 Montageanweisungen Seite 18

COMPACT 1.4
EN
ES
Tighten the M6 screws, securing the metal
8
plate.
Via the front section, position the equipment
9
with the plate on the hatch of the vehicle.
The hatch plate must remain level with the
EPDM seal.
10
Via the interior section, laterally align the
equipment in the hatch.
Important: If the seal (A) is not attached to
the base, remove the protective paper and
attach as indicated.
A
11 Position supports on M8 studs, secure with
Ø8 wide-rimmed washers and M8 self-
locking nut, tightening until the central part of
the support comes into contact with the plate.
10
18
Air conditioning for vehicles
A
8
9
=
=
11